Wile 200 grain moisture and hectolitre measurement device enable fast and simple measurement for sample humidity and temperature as well as sample hectolitre.
WILE 200 MOISTURE METER PROPERTIES
- Wile 200 grain moisture meter guarantees accurate results with automatic temperature property and hundred-litre weight balance capacity.
- Measurement device has patented grain levelling system.
- Wile 200 grain humidity and hectolitre measurement device can measure the humidity and hectolitre of 16 different grains.
- These grains include Barley, Wheat, Wheat pasta, Rye, Oat, Sorghum, Paddy, Corn, Fescue, Green beans, Clover (Red), Triticale, Sunflower oily seed, Sunflower long, Soy, Canola, Beans.
- Triticale is a Gramineae obtained from wheat and rye cross-breeding.
- The number of averaging can be set for the last measurements. It is possible to take the average of last 3 measurements, last 6 measurements, last 9 measurements.
- The device has an adjustable automatic turn-off property. It is possible to set for 30sec, 1min, 5min, 10min and 20min.
- Screen backlight can be turned on and turned off.
- You can view the battery status from Settings.
- Grain temperature can be measured in one of the °C/ºF units.
- Wile 200 grain moisture and hectolitre device measurement container volume is 0.4 litres.
- The device has a built-in USB port.
- Wile 200 grain moisture and hectolitre measurement devices include accessories such as carrier bag, carrier bag strap, USB cable, batteries and user manual.
The first image shows filled Wile 200 moisture meter cone with wheat. The second images show the black coloured carrier bag with the device.
MEASURABLE MATERIALS WITH WILE 200 HUMIDITY MEASUREMENT DEVICE
Corn, Wheat, Barley, Fescue, Triticale, Clover, Rye, Sorghum, Canola, Oat, Soy, Wheat for Pasta, Sunflower Oily Seed, Green Pea, Sunflower Long, Paddy, Bean
How to Use Wile 200 Moisture and Hectolitre Measurement Device?
-Place the funnel on the test device. First press ON/OFF button to turn on the test device, then release the button. After the device is open, you can see the last grain test result on the device.
-Use the up and down buttons to choose the measurement grain. After ing the grain, you want to measure, press ENTER. Try to place the test device on a stable and straight surface. Press ENTER again to start the test.
-Make sure that funnel slide pushed the grain inside to prevent any grain spillage. Fill the funnel with grain sample.
-Pull the slider. Grain will start to drag inside the test container.
-Remove the funnel when you see the message. First, drag the brush to the front, then bring the brush to its first position. Excess grain will be spilled outside the container.
-When the brush is back to starting position, measurement device will automatically start the measurement. The results will be visible on the screen in few minutes.
