LOYKA ATS 1300 Thermometer - 1,30 meter Immersion probe

ATS 1300  Thermometer; With a length of 1.50 meters including the handle,It’s a temperature probe used to detect the temperature measurement of samples at the bottom of the stacks, such as grains and pulses .

LOYKA ATS 1300 ROPERTIES

- The entire size of thermometer probe (including the handle) is 150 cm .

- Excluding the handle, immersion area of??the stack is 132 cm .

- Measuring sensor is located at far end of the probe. This will allow you to measure  temperature in deeper fields .

- The metal structure of our ATS 1300 probe is aluminum.

- It can perform for a long time with one battery.

- Loyka ATS 1300 gives low battery warning when battery is low.

- You can track the lowest and highest temperature with Min-Max mode .

- Temperature alarm can be set for lower and upper limits, for example; Alarming may sound If temperature exceeds over + 8 ° C or below -5 ° C . You can set it according to your wish .

- You can freeze the value in the screen with  Hold function .

- The display has IP 65 protection. This offers protection against water and dust sprinkle which may damage to the device . 

Usage areas of ATS 1300: It is used in the measurement of temperature in all areas where the stacking temperature can be measured such as grain, raw material and pulses by immersion .

Measurement result can be seen on the digital screen after immersing probe into the stack.