DT 125H Wood& Concrete Surface Moisture Meter

DT 125H Wood& Concrete Surface Moisture Meter. You can measure moisture on the surface of wood, cardboard,, paper, concrete, plaster, gypsum, etc.


THE PROPERTIES OF DT 125H WOOD& CONCRETE SURFACE MOISTURE METER:

- It measures moisture of wood and building materials (concrete, plaster, etc.)surfaces and environmental temperature and humidity.
- It has three catagories for wood (W1, W2, W3), and also four catagories for building materials (B1, B2, B3, B4).
- It also has a self-test mode. Press (MODE) button 2 times to enter this mode and touch the probes to the round points placed on the cover.
- The measured value can be seen on the display as number and a graph.(graphical display)
- Indicators: Dry, Moist, Wet
- Very easy measurement procedure: You make ion from (MODE) button (Wood or Concrete)then touch the probes to the surface and see the measured value on the display.
- You can reset the display by pressing (CLR) button.
- It has a ON/OFF switch.
- LCD dispay with backlight
- The backlight will be OFF after 10 seconds. And, it will be automatically OFF when it is not operated for 3 minutes.)
- Its body is covered with soft and strong rubber.
- There are protective cover, 2 x spare probes free available with product box.

 

Catagories for some materials:

W1: Oak, Willow, Cedar, Teak, Maple, Alder, Birch, Elm

W2: Pine, Cherry, Pinus Nigra, Plum, Paper, Textile, Walnut, Poplar

W3: Mushroom, Caoutchouc

B1: Gypsum/B2: Aerated concrete/B3: Cement/B4: Concrete

DT 125H can be used for measuring humidity of wood.