The TNS 50 soil sampling probe is a type of probe used for soil sampling. It is very easy to use. The two arms are pushed into the soil by pressing and turning around itself to enter deeper.

FEATURES

-The entire length of the soil sampling probe is 133 cm.

-There are two pointed knife-shaped protrusions for easy penetration of the tip of the probe into the soil.

-After the TNS 50 soil sampling probe is inserted into the soil, it is rotated to allow it to penetrate deeper.

-Soil sampling probe is made of stainless material.

-Probe Handle: 42cm, Body: 91cm, Replaceable tip point: 34 cm Ø 7cm.

-The holding handles of the probe have plastic wrap that prevents the hand from slipping.

-The pin on the probe connects the body of the probe to the end. In this way, the end part of the probe can be changed easily if you want to change.

The tip of the TNS 50 soil sampling probe and a sample taken from the soil are closely visualized in the image.

As you can see in the picture above, you must rotate the probe when you insert it into the ground. In this way, you will allow the probe to penetrate deeper.

The pin that you see in the picture connects the probe body and the end part. In this way, the end of the probe can be changed easily if you want to change.