CL200 chlorine tester measures chlorine level.
GENERAL PROPERTIES OF CL200 CHLORINE TESTER:
- Directly measures total chlorine level.
- Lower than 0.01ppm detecting limit.
- Wide measurement range upto 10ppm. (dilution method is used between 10-50ppm)
- Not affected by sample colour or blurring.
- Automatic electronic calibration.
- 15 readings can be stored, named and recalled back.
- Smooth chlorine probe.
- Total chlorine (ppm) and temperature display at the same time.
- Analog bar graphics.
- 50 pcs of ExTab reactive tablets, smooth surface chlorine electrode, protective sensor cover, sample cap.
Operation Instruction
The product is delivered with sampling cap and 50 pcs of test tablets.
1- Put 1 piece of tablet into the sample cap and pour water above it.
2- Shake the cap till the tablet dissolved in water.
3- After dissolution, stick the chlorine tester into this cap and wait for the result.
4- Result will be displayed on display.
NOTE: This process should be repeated for each measurement.